Not for sale in prohibited states (CA, CT, CO (Boulder County and Broomfield), DE, FL, HI, IA, IL, MA, MD, MN, NJ, NY, OR, RI, WA, Washington DC, Puerto Rico).  Your order will be canceled if you are ordering from one of these states.

This is for 1 Super Safety Kit

These Super Safety’s are CNC from D2 and S7 Tool Steel, The 308 Lever is Spring Steel

This is a 3 Position Super Safety, this device actively  resets the trigger from the Bolt carrier group using the lever that is on the cam. When installed and tuned correctly it will allow faster follow up shots, this is not a Machine Gun Conversion device. This is classified as a ATS ( Active Trigger System ) it is designed by Hoffman Tactical, I do not claim to be the creator. You can find many of help on YouTube how this works and how to install it to make it run efficiently.

Items in each kit

1-Silver Knurled D2 Cam PVD Coated

1-Silver 308 Spring Steel Lever PVD Coated

1-Silver S7 Lever PVD Coated 

1-Rounded Detent

1-Curved Pre Cut Trigger Ar15 Milspec

Tips From A Customer

1.The rear of the hammer when in the cocked position will not allow the lever to move forward enough to either close the upper on the lower or reset the trigger. the rear face of the trigger should be relieved until the upper will close. The lever should be able to move forward until the hammer is released. These may be the same amount of relief of the non-striking surface of the hammer or not.

2. The lever will certainly interfere with the BCG. Use layout blue or a marker to paint the flat surface of the lever facing the BCG. Work the charging handle. It will get stuck in the rear position. Tap the muzzle on a softer surface tho allow the BCG to return to battery and open the action. File or sand the areas where the color from the layout blue or marker has been wiped off. Repeat the procedure until the action will JUST function without the BCG hanging up on the lever (about .002 -.004"). Do not over adjust the lever or it will miss the BCG completely and ruin the lever.

3. Closed the action and test. If the trigger pull is excessive, slightly sand and polish the trigger on the flat surface on the top left side (rounded) until function is smooth and trigger release is acceptable.